WYA-13X Sodium type molecular sieve
Contact Info
- Add:No. 28 Haining Road, Shuyang Economic Development Zone, Jiangsu Province, Zip:
- Contact: Manager Yu
- Tel:0527-83968080 83968070
- Email:sales@chinaalum.com
Other Products
WYA-13X Sodium type molecular sieve
1.Properties:This product dissolves in strong acid or alkali,insoluble in water and organic solvent.
2.Appearance:egg white particle
3.Uses:This product is mainly used as air purifying agent,catalyst carrier et al.
4.Production specifications and technical indexes:
|
Indexes |
Unit |
Φ2~3mm |
Φ3~5mm |
1/16" |
1/8" |
|
Pore diameter |
nm |
9~10 |
|||
|
Abrasion rate |
% |
≤0.3 |
≤0.3 |
≤0.3 |
≤0.3 |
|
AdsorbedCO₂(250 mmHg pressure,25℃) |
% |
≥18.0 |
≥18.0 |
≥18.0 |
≥18.0 |
|
Static adsorbed (17.5 mmHg pressure,25℃) |
% |
≥26 |
≥26 |
≥25 |
≥25 |
|
Bulk density |
g/ml |
≥0.64 |
≥0.63 |
≥0.60 |
≥0.60 |
|
Crashing strength |
N/sphere |
≥30 |
≥60 |
≥30 |
≥45 |
|
H2O content of package |
% |
≤1.5 |
≤1.5 |
≤1.5 |
≤1.5 |
Regenerating method and conditions:
(1)Dehydration:molecular sieve is heated at 500-550℃for two hours,then cooled under air insulation,or molecular sieve is heated at 300-350℃for 2 hours under vacuum condition,then cooled under air insulation.
(2)Removing of organic materials:The over-heat inert gas with 200-350℃passes through the molecular sieve bed layer for certain time,then,the organic materials is deadsorbed and molecular sieve is regenerated.
(3)Removing of gaseous materials:Removed and generated under vacuum condition.
Precautions:
(1)Molecular sieve must be stored in close and dry place.If moisture adsorption,the regeneration is needed for use and the properties ofmolecular sieve do not change.
(2)The regenerating temperature cannot be over 600℃,otherwise,its structure can be broken,the activity lost and adsorption performance decreased.
(3)The pH value of medium is 5~12.
| Industry Category | Chemicals |
|---|---|
| Product Category | Adsorbent Series |
| Brand: | Jingli Brand |
| Spec: | WYA-13X Sodium type molecular sieve |
| Manufacturer: | Jiangsu Jingjing New Materials Co.,LTD. |
| Origin: | China / Jiangsu / Suqianshi |
